COMPANY HEADER
An established design that has gained wide acceptance for commercial and military applications. Batteries are held under constant spring tension assuring low contact resistance. Retainer clips are available to lock batteries in place and prevent shifting or loosening. Recommended for use where shock or severe vibration is encountered. Special fabrication for more than four batteries or variations from standard stock parts can be assembled to meet your requirements.
Request Information
Unit of Measure
Items
1100 Series End-to-End Base Stainless Steel Battery Holder (1139)

1100 Series End-to-End Base Stainless Steel Battery Holder
1100 Series End-to-End Base Stainless Steel Battery Holder (1189)

1100 Series End-to-End Base Stainless Steel Battery Holder
1100 Series End-to-End Base Stainless Steel Battery Holder (1191)

1100 Series End-to-End Base Stainless Steel Battery Holder
1100 Series End-to-End Base Stainless Steel Battery Holder (1194)

1100 Series End-to-End Base Stainless Steel Battery Holder
1100 Series End-to-End Base Stainless Steel Battery Holder (1139)

1100 Series End-to-End Base Stainless Steel Battery Holder
Holds Number of Cells N/A 1 N/A 2 N/A 3 N/A 4 N/A 1
Base Width W N/A 0.687 in17.4 mm
Base Length L N/A 2.125 in54.0 mm N/A 4.093 in104 mm N/A 6.030 in153.2 mm N/A 8.010 in203.5 mm N/A 2.125 in54.0 mm
Holder Height H N/A 0.656 in16.7 mm N/A 0.656 in16.7 mm N/A 0.656 in16.7 mm N/A 0.656 in16.7 mm N/A 1.000 in25.4 mm
Height to Battery Center C N/A 0.437 in11.1 mm N/A 0.437 in11.1 mm N/A 0.437 in11.1 mm N/A 0.437 in11.1 mm N/A 0.625 in15.9 mm
Mounting Hole Distance J N/A
Mounting Holes CTR to CTR N/A 1.343 in34.1 mm N/A 3.312 in84.1 mm N/A 5.250 in133.4 mm N/A 7.230 in183.6 mm N/A 1.343 in34.1 mm
Cell Type N/A AA N/A AA N/A AA N/A AA N/A C
Series N/A 1100
Insulated Contact N/A One
Clip Material N/A Spring Steel
Clip Plating N/A Nickel
Contact Eyelet Material N/A Brass
Contact Eyelet Plating N/A Nickel
Insulating Washers Material N/A Fiber
Insulating Washers Material Type N/A Resin Impregnated
Solder Lugs Material N/A Brass
Solder Lug Plating N/A Tin
Phenolic Base Type N/A PBE
Phenolic Base Rating N/A MIL-P-3115C
Stainless Steel Base N/A Ribbed, for Added Support
Steel Base Material N/A Spring Steel
Steel Base Plating N/A Nickel
Certification N/A ISO 9001 RoHS Compliant
Modification N/A We welcome the opportunity to quote on variations of standard items. Use our engineering service for your custom-built holders. Holders with PC and Quick-Fit terminals available on special order.
Additional Information N/A
  • Ideal for NiCd, Alkaline, NiMH, Carbon, Zinc and Lithium Cells
  • Corrosion Resistant, Nickel Plate
  • Brass Contacts, Nickel Plate
  • Moisture Proof Resin Impregnated, Fiber Insulating Washers
Note N/A Insulator tube Supplied