Keystone Electronics Corp. - Led Lens Caps

Designed for use with T-1 or T-1 3/4 LEDs, these Lens Caps are available in round or square configurations. They snap-mount through the front panel for easy, light-finger pressure, installation. The LED is inserted into the cap from behind the panel and held securely in place.

The Lens Cap protects the LED from physical damage while guarding the components from electrostatic discharge (ESD), up to 16 KV. More economical than indicator light assemblies, the caps feature striated lines and fresnel rings which permit up to 180 viewing angles with either diffused or non-diffused LED's. They provide exceptionally high contrast and visibility.

Unit of Measure

Items	8650 Standard Height Round Cap	8651 Standard Height Round Cap	8652 Standard Height Round Cap	8653 Standard Height Round Cap	8662 Standard Height Round Cap
LED Size	N/A T-1	N/A T-1	N/A T-1	N/A T-1	N/A T-1 3/4
Material	N/A Polycarbonate
Color	N/A Red	N/A Green	N/A Yellow	N/A Clear	N/A Red
Mounting Hole Size	N/A 0.171 in4.3 mm	N/A 0.171 in4.3 mm	N/A 0.171 in4.3 mm	N/A 0.171 in4.3 mm	N/A 0.250 in6.4 mm
Mounting Hole Type	N/A
Minimum Mounting Centers	N/A 0.250 in6.4 mm	N/A 0.250 in6.4 mm	N/A 0.250 in6.4 mm	N/A 0.250 in6.4 mm	N/A 0.375 in9.5 mm
Panel Thickness	N/A 0.031 to 0.062 in0.79 to 1.57 mm	N/A 0.031 to 0.062 in0.79 to 1.57 mm	N/A 0.031 to 0.062 in0.79 to 1.57 mm	N/A 0.031 to 0.062 in0.79 to 1.57 mm	N/A 0.062 to 0.125 in1.57 to 3.18 mm
Certification	N/A ISO 9001 RoHS Compliant
Note	N/A